Topography Equipment GPS Geodetic RTK GNSS Base And Rover Tilt Measurement With PDA Surveying Instrument

In Stock
$2,150
In Stock
Category:

Description

SPECIFICATIONS:

GNSS
GPS L1,L2,L5
GLONASS L1,L2
BDS B1,B2,B3
GALILEO E1,E5a,E5b
QZSS L1,L2,L5
SBAS L1
Supported data formats NMEA-0183
Modification amount of I/O RTCM 2.X,RTCM3.X
Data update rate 1Hz(Customized MAX 20Hz)
Recapture time <1s
Cold boot <40s
Accuracy
Point positioning(RMS) Horizontal:1.5m ; Vertical:3.0m
DGPS(RMS) Horizontal:0.4m ; Vertical:0.8m
RTK(RMS) Horizontal:±(10mm+1ppm)
Vertical:±(15mm+1ppm)
Time Accuracy(RMS) 20ns
Static Accuracy (RMS) Horizontal:±(2.5mm+1ppm)
Vertical:±(5mm+1ppm)
Speed Accuracy(RMS) 0.03m/s
Tilt compensation(Within 30 °) <2cm(Tilt function is optional)
System
Bluetooth V2.1+EDR / V4.0 Dual mode
WIFI 802.11 b/g/n
Radio External Launch: 5W/35W(External radio is adjustable)
Inner Power :0.5/1W adjustable
Frequency :410-470MHz
Communication protocol :TrimTalk,TrimMark3,PCC-EOT
Network All-Modes device
LTE FDD: B1/B3/B5/B8
LTE TDD: B38/B39/B40/B41
TD-SCDMA: B34/B39
CDMA: BC0
WCDMA: B1/B8
GSM: 900/1800MHz
Internal Storage 32GB
Light
Power lamp power supply indicators
Satellite lamp Blinking indicates active location
Bluetooth lamp Bluetooth connection stay lights up
Data link lamp Blink with a difference
WLAN WIFI connection saty lights up
Battery
Specifications 7.4V,9750mAh
Endurance ≥15Hours
Environment
Operation temperature ‘-20℃~-70℃
Storage temperature ’-40℃~-85℃
Shock and vibration Resistance to 2m drop with rod at normal temperature
Water / Dustproof IP67
Physical
Material Magnesium alloy casing+ABS/PC
Size 156mm*156mm*102mm
Weight 1.4kg
Accessories
M68 receiver X 1
5V/2A USB power adapter X 1
USB A To Type-C cable X 1
Connector X 1

Topography Equipment GPS Geodetic RTK GNSS Base And Rover Tilt Measurement With PDA Surveying Instrument

Reviews

There are no reviews yet.

Be the first to review “Topography Equipment GPS Geodetic RTK GNSS Base And Rover Tilt Measurement With PDA Surveying Instrument”

Your email address will not be published. Required fields are marked *