Italian Design High Precision 5 Hz Stonex S980/S6II Trimble Mainboard GPS RTK GNSS Receiver Stonex S6II
Description
| Channels:: | 800 | GPS:: | L1C/A, L1C, L1P, L2C, L2P, L5 |
|---|---|---|---|
| GLONASS:: | L1C/A, L1P, L2C/A, L2P, L3 | Galileo:: | E1, E5a, E5b, ALTBOC, E6 |
| BeiDou:: | B1, B2, B3, ACEBOC | QZSS:: | L1 C/A, L1C, L2C, L5, L6 |
| IRNSS:: | L5 | SBAS:: | L1, L5 |
| Update Rate:: | 5 Hz | Operating System:: | Linux |
| Memory:: | 32 GB | ||
| Highlight: | 5Hz dual frequency gnss receiver
, Stonex S980 dual frequency gnss receiver , GPS RTK dual frequency gps receiver |
||
Italian Design High precision 5 Hz Stonex S980/S6II Trimble Mainboard GPS RTK GNSS Receiver Stonex S6II .










| Tracking | |
| Board: | Novatel OEM729 |
| Channels: | 800 |
| GPS: | L1C/A, L1C, L1P, L2C, L2P, L5 |
| GLONASS: | L1C/A, L1P, L2C/A, L2P, L3 |
| Galileo: | E1, E5a, E5b, ALTBOC, E6 |
| BeiDou: | B1, B2, B3, ACEBOC |
| QZSS: | L1 C/A, L1C, L2C, L5, L6 |
| IRNSS: | L5 |
| SBAS: | L1, L5 |
| Update Rate: | 5 Hz |
| Operating System: | Linux |
| Memory: | 32 GB |
| Positioning | |
| Static Survey: | 3 mm + 0.1 ppm RMS (Horizontal) |
| 3.5 mm + 0.4 ppm RMS (Vertical) | |
| RTK (< 30 Km): | 8 mm + 1 ppm RMS (Horizontal) |
| 15 mm + 1 ppm RMS (Vertical) | |
| Code Differential: | 0.40 m RMS |
| SBAS Accuracy: | 0.60 m |
| Internal UHF Radio | |
| Model: | TRM 501 |
| Type: | Tx – Rx |
| Frequency Range: | 410 – 470 MHz |
| 902.4 – 928 MHz | |
| Channel Spacing: | 12.5 KHz / 25 KHz |
| Transmission Power: | 2-5 watt |
| Maximum Range: | > 5 km with 2 watt |
| > 10 Km with 5 watt | |
| Physical | |
| Size: | Φ151mm x 94.5mm |
| Weight: | 1.50 Kg |
| Operating Temperature: | -40 °C to +65 °C |
| Storage Temperature: | -40 °C to +80 °C |
| Waterproof/Dustproof: | IP67 |
| Shock Resistance: | Designed to endure a 2 m pole drop onto a concrete floor with no damage |
| Vibration: | Vibration resistant |
| Power Supply | |
| Battery: | Rechargeable 7.2 V – 13.600 mAh |
| Voltage: | 9 to 28 V DC external power input with over-voltage protection (5 pins Lemo) |
| Working Time: | Up to 10 hours |
| Charge Time: | Typically 4 hours |

1. Warranty: 12 months warranty is offered for survey equipment. 6 months warranty offered for survey accessory. Warranty comes in effective from the day your receive good.
2. Repair in warranty: We are responsible for supplying new parts for repairing. Round way freight will be charged by us. If it is necessary, product will be required to send back to our service center to be repaired, round way freight is charged by us. Our engineer will repair in your office for special case.
3. Repair out of warranty: We will offer related parts at commercial cost. Freight will be shared by us
4. Training and calibration: Our engineer is qualified for training and calibration for GNSS and Total Station on site. We offer this service to bulk order while customer has requirement.
5. Technical support is offered 24/365.











Reviews
There are no reviews yet.